King Portable Brinell Hardness Tester Model A1 With 3000Kg Test Head
King Portable Brinell Hardness Tester Model A1 With 3000Kg Test Head
King Portable Brinell Hardness Tester Model A1 (3000Kg Test Head)
Included:
- 3000 Kg Test Head model B1. Calibrated for a 0-3000Kg Load
- Standard Base (13-1/2" Gap and 4" Throat) model C1
- 10mm Tungsten Carbide Ball
- (3) Anvils; Flat, Vee (for round parts) & Dome
- Instruction Manual
- Maintenance Manual
- Portable Hardness Testers
- King Portable Hardness Tester
- King Brinell Tester Complete
| King ePortaRock H Portable Hardness Tester, Load Capability of 100 kgf |
| King ePortaRock L Portable Hardness Tester, Load Capability of 5 kgf |
| King Pin Tester |
| King KingScan V Kit Includes: Scope, Verification Block, Charging Cable, Custom Hard Case and Calibration Certificate |
| King KMTB Test Block 2"x 6" for 3,000kg (+/- 20 HBW) (specify required hardness range at checkout) |
| King KingScope E2 100 Brinell Microscope (Type A) |
| King Brinell A1 Hardness Tester Complete Includes a 3,000kg or Low Pressure Head with a Standard Base, 131/2" Gap and 4" Throat with Stroke Limiter |
| King KingScope E1 Deep Reading Brinell Microscope (Type B) |
| Bag of 250 King Pins (< 1% Tolerance) |
| STE-B Ernst Pin Brinell Portable Hardness Tester - Impact Hammer Version Only |
| King F2 Test Block 2"x 6" for 500kg (specify required hardness range at checkout) |
| King Brinell A2 Hardness Tester Complete Includes a 3,000kg or Low Pressure Test Head with a Standard Base and Long Ram with Stroke Limiter |
| PINS-250 Ernst - Package of 250 Calibrated Pins Class G for Pin Brinell Hardness Tester - Standard |
| King F2-SP Test Block 2"x 6" for other loads (Special Order) (specify required hardness range at checkout) |
| King Brinell A3 Hardness Tester Complete Includes a 3,000kg or Low Pressure Test Head and a Chain Adapter |
| King K4MTB Test Block 4"x 4" for 3,000kg (+/- 20 HBW) (specify required hardness range at checkout) |
| King Brinell B1 3000 kg Test Head |
| King Brinell B2 1000 kg Test Head |
| King Brinell B3 3000 kg Test Head with Long Ram |
| King Brinell B4 1000 kg Test Head with Long Ram |
| King Brinell C1 Standard Base, 13.5" Gap and 4" Throat with Stroke Limiter |
| King Brinell C2 King Chain Adapter without Roller Chain |
| King Brinell C2 King Chain Adapter with 4 feet of Roller Chain |
| King Brinell C3 Additional Roller Chain, per foot |
| King Brinell C4 Adapter for Holding Test Head in Position without Base |
| King Brinell C5 Special Standard Base, 13.5" Gap and 6" Throat |
| King Brinell C6 Special 20" Base and 4" Throat with Stroke Limiter |
| King Brinell C7 Special 20" Base and 6" Throat |
| King D1 Case for B1 |
| King D2 10mm Tungsten Carbide Brinell Ball |
| King D3 5mm or 2.5mm Tungsten Carbide Brinell Ball |
| King D4 Adapter for 5mm or 2.5mm Ball, Complete with Carbide Ball |
| King D5 Adapter for Reverse Testing |
| King D7 Stage Micrometer for Checking Brinell Microscopes |
| King D9 Wall Chart |
| King D10 Heavy Duty Cover for A1 & A2 (Marine Grade Leatherette) |
Key Features
ACCURATE
- Manufactured to the most exacting tolerances ensuring consistent, repeatable results
- Certifications/Standards ASTM E-10, ASTM E-110, ISO 17025
- Calibrated with traceability to NIST
- Calibrated to build, then release, a load of 3000 kgf of pressure
- Permanent impression can be checked and rechecked
- Has a 360° orientation and is self-aligning
DURABLE
- Tungsten carbide ball certified for density and roundness
- Stroke limiter for reduced operator error and provides consistent performance between operators
- One-year Limited Warranty
- Calibration and service plans available
VERSATILE
- Can be used in virtually any position; right side up, upside down, or even sideways.
- Portable so either the part can be moved to the tester or you can take the tester to the part
- Lightweight and easy to maneuver
- Fully interchangeable with multiple bases
- Only one operator required
- Flat, dome and “V” anvils supplied as standard equipment
King Brinell Hardness Tester Technical Specifications
|
Operation Method/Principle |
Brinell (Tungsten Carbide ball with a manual hydraulic applied load) |
|
Certifications/Standards |
ASTM E-10, ASTM E-110, ISO 17025 |
|
Dimensions & Weight |
23.5” x 11” x 12”; 38 lbs. |
|
Scales |
HB30, HB15 |
|
Loads |
3000 kgf, 1500 kgf |
|
Load Application |
Manual |
|
Tester Base Capacity |
4” horizontal reach and 13.5” vertical (larger bases available) |
KING Tester received the ISO 17025 accreditation from the American Association for Laboratory Accreditation (A2LA). All King Tester products are certified and calibrated per ASTM E10 standards.
KING Portable Brinell Hardness Tester – Since 1936
The easiest and most portable hardness tester on the market. Use it in tight spots, right side up, upside down, or sideways!
King Portable Brinell Metal Hardness Testers are the most reliable, easy to use, and affordable portable Brinell testers available and the ONLY portable Brinell testers on the market that are Directly Verifiable. King Portable Brinell Testers are accurate to within 1%, calibrated with traceability to NIST, and certified and calibrated per ASTM E10 standards.
King Portable Brinell Tester
On the market for 80 years, the King Brinell Tester units are lightweight, easy to maneuver and require only one operator, making them ideal for use as portable units. Versatile enough to test virtually any size and shape of metal specimen, these testers are easy to use. The operator simply places the specimen between the anvil and the test head, cranks the test head down onto the specimen, locking the tester in place, closes the pressure release valve, and pulls the hydraulic lever until desired load is reached.
The tester applies up to a 3,000 kg load on a 10mm ball, making a lasting impression, which is available for re-reading at any time. A by-pass valve is automatically activated at the calibrated load, eliminating the chance of overloading. The impression is then read and recorded by the operator using either a E1-King Deep Reading Brinell Microscope or the G1- KING SCAN® IV automatic Brinell microscope. This portable Brinell hardness tester meets all international standards for Brinell testing including ASTM E-10 and ASTM E-110, British Standard #240, Pt.2, Sect.1 and JIS Standards, and is calibrated to 1/2 of 1% of load on equipment traceable to NIST Standards.
King Brinell – Deep Reading Brinell Manual Microscope, Type B, Model E1
Constructed from stainless steel, the rugged and optically reliable King Brinell microscope is the most versatile on the market today.
Featuring a 20X pre-focused lens, the microscope has a narrow nosepiece which easily fits into tight recesses, resulting in less grinding on castings, billets and dies.
For added stability when performing flat work, a slip-on base adapter is included. A side opening in the microscope allows plenty of natural light for viewing, and a cordless movable pen light can be used in dim conditions.
Calibrated on equipment traceable to NIST standards, the King Brinell microscope meets ASTM E-10 specifications.
It is ready to use and comes equipped with a handy storage case.
Sowant Precision Gage can offer you King Portable Brinell Metal Hardness Testers,kING test blocks,China made test blocks,Mituttoyo depth gages,Insize calipers,Cameron Ball gages,API thread gauges,BCSG thread gages,Acme thread gauges,Stub Acme thread gauges.
