3 1/2 UP TBG PLUG
All gauges will be supplied with a Calibration Report with stand-off dimensions from a MASTER that has been certified.
All of our gages are made of tool steel hardened to Rockwell C 60-62 and are cryogenically frozen to insure their stability. Each gage is put through a series of in-process and final inspections with tolerances to ±0.0002 of an inch (±5 μm). We then qualify each gage using a certified master gage, and provide a calibration report detailing the measured dimensions .
We have the following items in stock, can delivery to you through DHL/UPS/FEDEX shortly.
All API thread gauges made by API certificated thread manufactory, and calibrated by API thread master under the control of CNAS.
|
UPSET (E.U.E) TUBING WORKING/MASTER/TAPER GAGES |
|||||
|
SIZE |
Outer Dia. |
T.P.I |
T.P.F |
TAPER |
ANGLE |
|
1.050 EUE/UP TBG |
26.67mm |
10 |
3/4 |
1:16 |
60° |
|
1.315 EUE/UP TBG |
33.4mm |
10 |
3/4 |
||
|
1.660 EUE/UP TBG |
42.16mm |
10 |
3/4 |
||
|
1.900 EUE/UP TBG |
48.26mm |
10 |
3/4 |
||
|
2 3/8 EUE/UP TBG |
60.33mm |
8 |
3/4 |
||
|
2 7/8 EUE/UP TBG |
73.03mm |
8 |
3/4 |
||
|
3 1/2 EUE/UP TBG |
88.9mm |
8 |
3/4 |
||
|
4 EUE/UP TBG |
101.6mm |
8 |
3/4 |
||
|
4 1/2 EUE/UP TBG |
114.3mm |
8 |
3/4 |
||
